Expressive Painting

Imaginea respectă alegerile tale: , .

Biografie artist

A pioneer of abstract iron sculpture and concrete constructionism. Discover his rhythmic, welded metal works today.

Comandă în patru pași simpli

Nu vă grăbiți. Puteți modifica orice răspuns; prețul din coșul de comandă se actualizează în funcție de fiecare alegere.

1 Pasul unu din patru

Ce dimensiune doriți?

Aceste dimensiuni păstrează proporțiile tabloului original. Ilustrația prezintă alegerea dumneavoastră pe un perete, deasupra unei canapele de doi metri.

Tabloul tău: () — cu cadrul său.

Sau introduceți propriile dimensiuni

Standard
personalizat
CM
INCH

Alegeți dintre dimensiunile noastre prestabilite, care respectă proporțiile originale ale operei de artă.

lățime
înălțime

Introduceți lățimea și înălțimea necesare pentru a se potrivi ramei sau peretelui dumneavoastră. Această lucrare este pictată manual, așa că, pentru o dimensiune cu o formă diferită, artistul poate picta puțin mai mult în jurul imaginii sau poate tăia puțin din margini — dumneavoastră decideți. Vă vom trimite o simulare digitală pentru aprobare înainte de a începe pictarea. Imaginea afișată pe această pagină nu reprezintă rezultatul real — doar simularea este reprezentativă.

2 Pasul doi din patru

Cum ar trebui pregătită: rulată, întinsă pe pânză sau înramată?

Prețurile de mai jos sunt pentru dimensiunea aleasă la primul pas.

Alege marginile tabloului pe pânză întinsă

Alege cadrul tău

Corner sample of the WhiteWrap canvas edge finish, stretched on lemn masiv bars
Alb lei1
Corner sample of the BlurSideWrap canvas edge finish, stretched on lemn masiv bars
Margini difuze lei1
Corner sample of the ExtendedWrap canvas edge finish, stretched on lemn masiv bars
Extins lei1
Corner sample of the P118B picture frame: polistiren turnat, 5 cm wide and 3 cm thick
P118B lei10
Corner sample of the P118H picture frame: polistiren turnat, 5 cm wide and 3 cm thick
P118H lei10
Corner sample of the P118W picture frame: polistiren turnat, 5 cm wide and 3 cm thick
P118W lei10
Corner sample of the P438Z picture frame: polistiren turnat, 5.5 cm wide and 3.5 cm thick
P438Z lei10
Corner sample of the P508JH picture frame: polistiren turnat, 7 cm wide and 3.5 cm thick
P508JH lei12
Corner sample of the P508YH picture frame: polistiren turnat, 7 cm wide and 3.5 cm thick
P508YH lei12
Corner sample of the P805H picture frame: polistiren turnat, 5 cm wide and 3.5 cm thick
P805H lei10
Corner sample of the P805Z picture frame: polistiren turnat, 5 cm wide and 3.5 cm thick
P805Z lei10
Corner sample of the P919BZ picture frame: polistiren turnat, 7 cm wide and 3.5 cm thick
P919BZ lei10
Corner sample of the P919G picture frame: polistiren turnat, 7 cm wide and 3.5 cm thick
P919G lei10
Corner sample of the P919XJ picture frame: polistiren turnat, 7 cm wide and 3.5 cm thick
P919XJ lei10
Corner sample of the P959ZH picture frame: polistiren turnat, 5 cm wide and 3 cm thick
P959ZH lei10
Corner sample of the P968JZ picture frame: polistiren turnat, 6 cm wide and 4 cm thick
P968JZ lei12
Corner sample of the W106C picture frame: lemn masiv, 5 cm wide and 3 cm thick
W106C lei8
Corner sample of the W218G picture frame: lemn masiv, 5 cm wide and 3 cm thick
W218G lei10
Corner sample of the W218JH picture frame: lemn masiv, 5 cm wide and 3 cm thick
W218JH lei8
Corner sample of the W218Y picture frame: lemn masiv, 5 cm wide and 3 cm thick
W218Y lei10
Corner sample of the W307PJ picture frame: lemn masiv, 6 cm wide and 3 cm thick
W307PJ lei10
Corner sample of the W316G picture frame: lemn masiv, 6 cm wide and 3 cm thick
W316G lei10
Corner sample of the W316PJ picture frame: lemn masiv, 6 cm wide and 3 cm thick
W316PJ lei8
Corner sample of the W316Y picture frame: lemn masiv, 6 cm wide and 3 cm thick
W316Y lei10
Corner sample of the W398PJ picture frame: lemn masiv, 5 cm wide and 3 cm thick
W398PJ lei8
Corner sample of the W4111J picture frame: lemn masiv, 6.5 cm wide and 3.5 cm thick
W4111J lei10
Corner sample of the W500HY picture frame: lemn masiv, 7 cm wide and 5 cm thick
W500HY lei15
Corner sample of the W500JH picture frame: lemn masiv, 7 cm wide and 5 cm thick
W500JH lei15
Corner sample of the W692G picture frame: lemn masiv, 8 cm wide and 4 cm thick
W692G lei12
Corner sample of the W849H picture frame: lemn masiv, 5 cm wide and 3 cm thick
W849H lei8
Corner sample of the W940BG picture frame: lemn masiv, 7.5 cm wide and 4.5 cm thick
W940BG lei15
Corner sample of the W953PJ picture frame: lemn masiv, 6 cm wide and 3.5 cm thick
W953PJ lei8
Corner sample of the H24-GOLD picture frame: lemn sculptat cu gesso, 10 cm wide and 6 cm thick
H24-GOLD lei30
Corner sample of the H24-SILVER picture frame: lemn sculptat cu gesso, 10 cm wide and 6 cm thick
H24-SILVER lei30
Corner sample of the H36-GOLD picture frame: lemn sculptat cu gesso, 15 cm wide and 6.5 cm thick
H36-GOLD lei45
Corner sample of the H36-SILVER picture frame: lemn sculptat cu gesso, 15 cm wide and 6.5 cm thick
H36-SILVER lei45

Ramă: . Dimensiuni cu ramă: .

3 Pasul trei din patru

Doriți să modificați ceva în tabloul respectiv?

Majoritatea oamenilor răspund negativ. Deoarece fiecare pictură este realizată manual, artistul nostru poate adapta lucrarea și pentru dumneavoastră.

Exemple de elemente care pot fi modificate: Înlocuirea feței cu fotografia clientului; Adăugarea unui animal de companie (de ex., înlocuirea unei pisici cu un câine); Includerea unui mesaj ascuns în fundal; Modificarea peisajului sau a elementelor din fundal.
După plasarea comenzii, echipa ArtsDot.com va contacta clientul prin e-mail pentru instrucțiuni și va furniza o previzualizare (mockup)

4 Pasul patru din patru

Câteva opțiuni de finisare

Toate sunt opționale. Răspunsurile deja selectate nu implică costuri suplimentare.

Cine este autorul?

Livrare în întreaga lume () în 3-4 săptămâni, în loc de cele 5 săptămâni standard. (19 Noiembrie). Fără compromisuri în ceea ce privește calitatea.

O plăcuță de identificare, ca la muzeu?

Detalii plăcuță din bronz gravat

This elegant plaque features the artist's name and the title of the artwork, finely engraved for a timeless presentation.

It is made from bronze with a refined, elegant finish. The text is precisely laser-engraved for a sharp and permanent result. Measuring 9x2 cm, the plaque is compact yet easy to read. It's built to be durable and scratch-resistant, offering a professional, museum-quality look. Mounting is simple thanks to the included adhesive backing.

Detalii plăcuță din acril transparent

The plaque includes essential engraved details such as the artist's name, the title of the artwork, the date it was created, the type of media used-like oil on canvas or watercolor-a brief description of the piece, and a QR code that links to the complete artwork information.

It is crafted from clear acrylic, offering a sleek, modern appearance. The text is UV-engraved in black to ensure strong visual contrast. With a size of 10x15 cm, it ensures optimal readability. It comes equipped with two metal hooks for secure wall mounting. The plaque is designed to be weather-resistant, making it suitable for various environments, and it includes interactive features that work seamlessly with smartphone scanning.

Detalii placă din acril negru

This elegant plaque includes engraved information such as the artist's name, the title of the artwork, the date it was created, the type of media used (like oil on canvas or watercolor), a short description of the artwork, and a QR code for quick access to more information.

The plaque itself is made from refined black acrylic with a premium finish. The text is laser-engraved in white for high contrast and readability. Its size is 10x15 cm, designed to be easy to read. It comes with two metal hooks for professional mounting. The design is sleek and fits any interior style. It is also weather-resistant and durable, with built-in digital integration for mobile compatibility.

Un lac protector?

Când aveți nevoie de el?

✓ Verifică și comandă

Tabloul tău, exact așa cum l-ai comandat

Expressive Painting

Tehnică de reproducere

Dimensiune reproducere

-

Selecție de artiști de elită

Mai multe detalii, rafinament și timp suplimentar de execuție

-

Ramă pentru reproducere artistică

-

-

Pentru opere de artă sau reproduceri care depășesc 105 cm (aproximativ 41 de inch) pe oricare dintre laturi, cadrul va fi livrat demontat, sub formă de kit. Această metodă asigură o livrare sigură și previne deteriorarea în timpul transportului.

Este necesară asamblarea profesională – acest produs nu este de tip DIY (de făcut singur).
Kitul trebuie asamblat, iar pânza întinsă, de către un legător de cadre experimentat, utilizând adeziv pentru lemn (neinclus în colet), o cheie pentru întinderea pânzei și cleme pentru a menține barele la unghi drept în timp ce adezivul se usucă. Asamblarea incorectă sau tensiunea neuniformă a pânzei pot deteriora permanent opera de artă și nu sunt acoperite de garanția noastră.

  • Toate barele din lemn masiv sunt incluse, tăiate cu precizie la dimensiunea necesară.

  • Asamblat cu șuruburile incluse, plus adeziv pentru lemn pentru îmbinările de colț, care nu este furnizat și trebuie achiziționat de către tâmplarul dumneavoastră.

  • Sunt necesare unelte profesionale care nu sunt incluse: o șipte de întindere a pânzei (tensionator) și cleme pentru a menține barele la unghi drept în timp ce adezivul se usucă.

Important:
Îmbinările de colț necesită adeziv pentru lemn, barele trebuie fixate cu clești de strângere până când adezivul este complet uscat, iar întinderea pânzei pe cadrul asamblat necesită un clește pentru întins pânza. Niciunul dintre aceste elemente nu este inclus în kit. Vă rugăm să consultați un încadrator profesionist cu experiență înainte de a comanda această dimensiune.

Etichetă de prezentare

-

-

Lac de protecție

Lac lucios (intensifică nuanțele și oferă protecție împotriva luminii și a umidității)

-

Personalizează opera mea de artă

Exemple de elemente ce pot fi personalizate: Înlocuirea feței cu fotografia clientului; Adăugarea unui animal de companie (de exemplu, înlocuirea unei pisici cu un câine); Includerea unui mesaj ascuns în fundal; Modificarea peisajului sau a elementelor din fundal.

-

Livrare rapidă

Livrare la nivel mondial () în 3-4 săptămâni, în loc de cele 5 săptămâni standard. (19 Noiembrie). Fără compromisuri când vine vorba de calitate.

-

Livrare rapidă

Livrare la nivel mondial () în 5 săptămâni. (26 Noiembrie).

Inclus

Preț total calculat

lei 1249

Preț total lei 1249

Opțiunea cu sticlă este disponibilă doar pentru dimensiuni de sub 110 cm

Inclus în fiecare comandă

  • Livrare expres gratuită la nivel mondial
  • Pânză de in de înaltă calitate
  • Asigurare completă pentru transport
  • Garanție de rambursare a taxelor vamale
  • Garanția fidelității culorilor
  • Politica de retur în 100 de zile (doar pentru defecte de fabricație)
  • Garanție de rambursare 100%
  • Ofertă pentru comenzi multiple

Mai multe detalii despre această pictură

Previzualizare Previzualizare AR Comută pe versiunea Print Comută pe Imagine Digitală Trimite prin felicitare
Detalii despre lucrare Ghid Adaugă la favorite Descarcă imaginea Produse similare Radiografie Galerie foto Întrebări și răspunsuri Statistici
Robert Jacobsen

Robert Jacobsen

1912 - 1993, Denmark

Biografie artist

The Life and Career of Robert Jacobsen

Born in Copenhagen, Denmark, on 4 June 1912, Robert Jacobsen was a sculptor and painter whose life was defined by a movement between the heavy permanence of stone and the industrial lightness of metal. His early years in Denmark saw him working with granite and sandstone, creating massive structures that sought to give form to mythical creatures. This period of heavy, grounded material provided the foundation for a career that would eventually seek to conquer the void through more modern means.

A significant shift occurred in 1947 when Jacobsen traveled to France alongside his colleague Richard Mortensen. Living in France until 1969, he began to move away from the weight of traditional masonry, turning instead to the use of cast iron. It was during these years in France that he acquired the nickname "Gros Robert," a moniker reflecting his physical presence and his growing reputation within the international art scene. This era marked his transition into the realm of welded metal and abstract constructions, a direction that would define his professional identity for decades.

After returning to Denmark, he continued to influence the artistic landscape through both his creative output and his presence in academic circles. He remained active in the visual arts until his death on 26 January 1993 in Tågelund, Denmark. His life was a steady progression from the solid, tactile nature of the earth to the rhythmic, open structures of iron and steel.

Artistic Development and Early Works

In the early stages of his career, Jacobsen worked with the weight and permanence of stone. He focused on massive granite and sandstone structures, which he referred to as "Mythical Creatures" (Danish: Fabeldyr). These heavy, grounded forms represented a significant departure from the lighter, more skeletal works that would later define his reputation. By the late 1940s, his focus shifted toward a different kind of form, resulting in a group of sculptures known as "Dolls" (Danish: Dukkerne).

A pivotal shift occurred in 1947 when he traveled to France alongside his colleague Richard Mortensen. This move marked the beginning of a long residency in the country that would last until 1969. It was during these years in France that his relationship with material changed fundamentally. He moved away from the chisel and the heavy stone, turning instead to the welding machine and the industrial properties of cast iron. This transition allowed him to explore the concept of space and the void, using iron to create rhythmic, spontaneous constructions that seemed to defy gravity.

Technique and Artistic Style

Jacobsen’s evolution as a creator was marked by a fundamental shift in how he engaged with physical matter. In his earlier years, he worked with the heavy, traditional weight of granite and sandstone, carving massive structures he called "Mythical Creatures." He also moved through the textures of limestone, wood, and marble. However, his move to France prompted a departure from the chisel. He began to replace the traditional tools of the stonecutter with the welding machine, trading the resistance of rock for the malleability of iron and steel. This transition allowed him to move beyond the solid mass of the sculpture and instead explore the void.

His approach to construction was defined by a rejection of the pre-determined. He did not rely on sketches or rigid plans; instead, he favored a process of spontaneous creation where the form emerged through the act of making itself. This method allowed for a rhythmic elegance, where line and form connected in a state of constant, unscripted balance. By utilizing cast iron and steel, he was able to pursue the limits of space, treating the gaps within a sculpture as essential components of the work. He transformed solid, industrial materials into airy, spacious constructions that appeared to defy the perception of gravity.

Academic Roles and Professional Recognition

Jacobsen’s influence extended into the lecture halls of Europe’s most respected institutions. He held a professorship at the Academy of Fine Arts in Munich from 1962 to 1982, a tenure that spanned two decades of shifting artistic currents. Later, he returned to his roots in Copenhagen, serving as a professor at the Royal Danish Academy of Fine Arts between 1976 and 1983. These roles allowed him to shape the technical understanding of a new generation of artists through his deep familiarity with both stone and metal.

His contributions to the arts were met with significant formal honors. In 1967, he was awarded the Thorvaldsen Medal, a distinction that recognized his standing within the sculptural tradition. His stature in Danish society was further cemented in 1983 when he was named a Commander of the Order of the Dannebrog. These accolades reflected a career that moved steadily from the experimental spontaneity of his early welding to a position of established authority in the European art scene.

Legacy and Lasting Influence

The influence of Robert Jacobsen extends into the very fabric of Danish cultural recognition. His name is synonymous with excellence in the Danish film industry through the Robert Awards, or Robert Prisen. Established by the Danish Film Academy, these awards have been presented annually since 1984. The statuette itself was designed by the artist, ensuring his physical presence remains part of the ceremony's tradition. This connection to the cinematic arts provides a unique intersection between his visual abstraction and the broader Danish cultural landscape.

In the realm of contemporary visual arts, his memory is sustained through the Robert Jacobsen Prize of the Würth Foundation. Since 1993, this prize has been awarded to contemporary visual artists to commemorate his contributions to the field. Such recognition ensures that his name remains linked to the development of new artistic voices. His presence in the institutional world is equally established, with his works held in significant collections. These include the Guggenheim Museum in New York and the Statens Museum for Kunst in Copenhagen, placing his structural explorations within the permanent canon of international modern art.